[DoACT Emblem] University of Miskolc, Faculty of Mechanical Engineering and Informatics
INSTITUTE OF AUTOMATION AND INFOCOMMUNICATION
Address: 3515 Miskolc, Egyetemváros
Tel: 46-565-140, 46-565-000/1776, 46-565-111/1776
Email: gkautuni-miskolc.hu

-- --

Document store

Dr. Bouzid, Ahmed:
Hardware Implementation of an Embedded System for Gesture Recognition based on an Artificial Neural Network and IMU
(diploma work)
Note:

Dr. Bouzid, Ahmed:
Implementation of a New Analog to Digital Converter exploiting Hybrid Reconfigurability
(diploma work)
Note: A new architecture of an analog to digital converter has been created using hybrid reconfigurable design. Here modeling and simulation are ready and validated. The promising results show that the new architecture can be considered for high performance applications that require analog sensors. The next step is to implement the digital part on FPGA using XSG and the analog part on FPAA. Then create a PCB of the solution. The connector should be PMOD type. The application of this ADC is its implementation for precision altimetery. Outcomes of the project: the student will acquire knowledge on how to drive a scientific/engineering project, how to create a high-performance reconfigurable embedded system dedicated for signal processing applications considering rapid prototyping. Get familiar with sensors, actuators and mixed signal processing. The project may result in scientific publications

Dr. Bouzid, Ahmed:
Ground Speed Sensor Implemented on Analog and Digital Reconfigurable Technologies
(diploma work)
Note: The project consists of creating a ground speed sensor implemented using hybrid reconfigurable design and ultrasonic transducers. The use of the Doppler effect could be the key to compute the velocity of a vehicle, but the real-time processing of the instantaneous frequency is considered. It has been proved that the Hilbert transform could be used to process the instantaneous frequency, hence the challenge is to implement this DSP tool on FPGA to maximize the performances. An experimentation phase with US transducers is essential to get familiar with electroacoustic instrumentation and to characterize the sensors. A modeling and simulation phase of the solution on MATLAB is also necessary to validate the algorithm. Possibly the use of a tool other than Hilbert transform for IFe should be considered. Outcomes of the project: the student will acquire knowledge on how to drive a scientific/engineering project, how to create a high-performance reconfigurable embedded system dedicated for signal processing applications considering rapid prototyping. Get familiar with sensors, actuators and mixed signal processing. The project may result in scientific publications

Dr. Bouzid, Ahmed:
Implementation of an Optical System for Measuring surface roughness
(diploma work)
Note:

Dr. Bouzid, Ahmed:
New Methods for Pose Determination. Contribution to Positioning, Velocimetry and Jerkmetry
2020 (PhD thesis)
Invitation

Dr. Bouzid, Ahmed:
THE PSOC 5LP LABBOOK
2018 (book)
Themes: Microprocessor, controller, DSP, FPGA, Embedded systems, Digital Systems
The PSoC 5LP LABBOOK


Copyright (c) Institute of Automation and Infocommunication
Intranet